Gate Lane Monitor Lane Monitor view Actions Fix Scans Fix Scans formOperations Gate Lane Monitor Lane Monitor view Actions Fix Scans Fix Scans form
The Fix Scans form enables you to correct scanned data, such as electronic scale, RFID, and OCR readings. In addition, from the Container Details or Chassis Details tab you can correct scanned container or chassis data.
In addition, you can use the following buttons to:
Submit: Call the process-truck API again and reprocess the auto gate stage, if you make changes in the Fix Scans form.
Pull Forward: Send the truck to the next gate stage.
View Images: View the OCR scan images in a web browser.
The ROADSCAN002 (IMAGE_URL) (on page 1) setting specifies the web service that provides the image viewer for the OCR scan images.
Send to Trouble: Send a truck to the trouble desk, if correcting the scanned data does not fix all the errors.
The following table lists the optional fields in the Fix Scans form:
|
Field Label |
Description |
|---|---|
|
Truck License |
Enter the truck license number for the truck in the lane. |
|
Scale Weight |
Enter the scale weight of the truck, including chassis and cargo, in kilograms. Optionally, you can enter the weight using a different unit of measure, such as pounds. In this case, you must indicate the unit of measure in the Scale Wt Unit field. |
|
Truck Id |
Enter the ID for the truck. |
|
Scale Wt Unit |
If the value entered in the Scale Weight field is not in kilograms, enter the unit of measurement for the scale weight of the truck. |
|
Tag Id |
Enter the RFID tag number for the truck in the lane. |
|
Bat Number |
Enter a BAT number that uniquely identifies the truck for your facility. |
|
Driver Card Id |
Enter the card ID of the driver of the truck visit. A driver card is an identification, other than a drivers license, that uniquely identifies a driver such as a Sealink or TWIC card. |
|
Driver License Nbr |
Enter the driver's license number. |